Home > News > Content
High Temperature And High Voltage Electric Heater Work Efficiency
May 31, 2017

High temperature and high voltage electric heater work efficiency, and heat evenly, when the high temperature resistance wire current through, the heat generated by the heater through the crystallization of magnesium oxide powder to the metal pipe surface diffusion, High Temperature And High Pressure Explosion-proof Electric Heater and then passed to the heated parts or air , To achieve the purpose of heating.

The high-temperature and high-voltage electric heater is made up of six electric heaters in series, and the whole is welded in the whole way to ensure that the equipment is safe, stable and efficient to heat the circulation medium under the conditions of high temperature and high pressure to reach the set temperature, The whole frame is fixed by frame, and the inside of the frame is filled with insulation cotton to reduce the heat loss, High Temperature And High Pressure Explosion-proof Electric Heater which greatly improves the heating efficiency of the product.

At the same time, high temperature and high voltage electric heater as a whole block block device, High Temperature And High Pressure Explosion-proof Electric Heater in the transport and use of the process, more convenient.

High-temperature high-voltage electric heater heating principle is as follows: electric heating tube with a U-shaped tubular heating element, according to the heating of different media design specifications, according to the power configuration requirements assembled on the flange cover, insert the need to heat the material, The amount of heat emitted to the heated medium to pass the temperature, to achieve the required process requirements.

 When the medium temperature reaches the set value of the process requirements, High Temperature And High Pressure Explosion-proof Electric Heater the control system according to the temperature sensor signal, after the PID operation to adjust the electric heater output power, the heating element of the resistive load to achieve temperature control. So that the medium temperature uniformity, to achieve the required requirements, when the heating element over-temperature or low level when the heating element interlock protection device immediately cut off the heating power to avoid heating components burned to extend the service life.


Zhenjiang Yutai Explosion-Proof Electric Heater Co.,Ltd