Home > News > Content
Wide Application Of Explosion-proof Electric Heater
Oct 12, 2017


Explosion-proof electric heater is an international popular high quality long-life electric heating equipment. The internal control system of the electric heater automatically adjusts the output power of the electric heater according to the temperature sensor signal of the outlet. Explosion-proof Electric Heater The dielectric temperature of the output port is even; when the heating element over-temperature, the heating element of the independent overheating protection device immediately cut off the heat supply, to avoid heating materials caused coking, metamorphism, carbonization, serious heating elements caused by burnout , Explosion-proof Electric Heater and prolong the service life of electric heater effectively.

Explosion-proof Electric heater working principle: Fluid explosion-proof electric heater is a kind of energy consumption conversion to heat, to heat the heating materials. At work, cryogenic fluid enters its inlet through a pipe under pressure, using the principle of fluid thermodynamics design path, Explosion-proof Electric Heater along the electric heating vessel internal specific heat exchanger, take away the heat energy produced by the heating element work, so that heated medium temperature rise, the electric heater outlet to obtain the process requirements of high-temperature medium.

Explosion-proof Electric heater application range:

The typical application occasions of explosion-proof electric heaters are:

1, chemical industry chemical materials heated heating, some pressure under certain powder drying, chemical process and spray drying.

2, hydrocarbon heating, Explosion-proof Electric Heater including petroleum crude oil, heavy oil, fuel oil, heat conduction oil, lubricating oil, paraffin, etc.

3, the process of water, superheated steam, molten salt, nitrogen (air) gas, water and gas, etc. need to heat up heating fluid.

4, due to the use of advanced explosion-proof structure, equipment can be widely used in chemical industry, military, petroleum, natural gas, offshore platforms, ships, mining areas and other explosion-proof sites.

Explosion-proof electric heater including container shell, explosion-proof chamber, transitional casing bundle, an electric heating bundle is connected with the flange tube plate and the container shell flange, the electric heating bundle is fixed on the flange tube plate, the electric heating bundle is arranged in the explosion-proof chamber, and a temperature-sensing probe tube is arranged in the container shell, Explosion-proof Electric Heater The inner end of the sensing probe tube is arranged in the container shell body, and the outer end of the sensing probe tube passes through the flange tube plate and is fixed on the flanged tube plate. The above setting allows the sensing element to extend directly from here into the container shell, the installation is very convenient; Explosion-proof Electric Heater this kind of temperature-sensing probe tube has a shorter length and saves the material; the biggest advantage of this setting is that the temperature probe tube does not need to be worn out from the explosion-proof chamber to ensure the sealing of the explosion chamber, Explosion-proof Electric Heater the welding is simple, the welding process is reduced and the production


Zhenjiang Yutai Explosion-Proof Electric Heater Co.,Ltd